INSTRUCTIONS

ASSEMBLY OF THE SEAT

Insert the pins of the sides and seat assembly into the holes of the headboard so that the entire extension of the pins protrudes from the headboard. Push the buckle of the front waist strap through the hole in the centre of the seat so that it protrudes from the top of the seat.

ASSEMBLY OF THE BIKE SEAT ON THE BIKE FRAME

According to the inclination of the upper frame tube of the bike frame, select and turn the wedge so that the seat is approximately horizontal or slightly uphill in the direction of the handlebars. Place the wedge from the underside of the seat by pushing the pin of the wedge into the hole in the seat.

Pull the main fastening strap through the hole in the side that is closest to the top of the top frame tube (on both sides) (already threaded for sports MTB frames with a significant and large slope of the upper frame tube).
 

* Place the seat on the bike (on the upper frame tube) so that the front of the seat touches the head tube.

* Wrap the front fastening strap 2 times around the head tube of the bike frame - thread the strap under the frame and lead around the head tube back to the second hole in the forehead. Snap the buckle and pull it tight.

Under the bottom frame tube, pull the main fastening strap back, snap the buckle and pull tight.

*The buckle must lie flat on the side of the seat, it must not be on the edge – there is a risk of loosening the strap!!!

*The strap must not be passed over the control cables, it must not limit their function!!!

*The strap must not be passed over the fender.

*Secure the free end of the strap so that it cannot be caught by the front wheel.

SEATING THE CHILD

*Fix the bike astride, then put the child in the seat.

*Hold the child sitting in front of you by the back waist straps and click into the protruding buckle of the front waist strap. Pull the waist straps by pulling on the free ends of the straps.

*Snap the buckles of the ankle straps and tighten them by pulling the free ends of the straps.