CABLE DUCT

The seat can also be used on frames with control cables running along the upper side of the frame tube, provided an adapter is used. This ensures full mobility of the cables.

If it is necessary to mount the seat on a bike with cables on the upper frame tube, such as this:



It is necessary to use an adapter (can be purchased here).

Thread the adapter onto the cables on the upper frame tube and fasten it to the place under the support wedge (approx. 20 cm from the head frame tube) with the help of tightening straps. Wider end to the saddle.

You have to pass the main fastening strap of the seat under the control cables
.
 

Before the ride, carefully check the free movement of the control cables. Check the function of the rear brake, front derailleur and derailleur.